Brian Staruk

Brian's Cold Process Hand Soap Recipe

note

My favorite recipe for hand soap which you’ll find by every sink in my home. I’ll adjust the fragrance between batches but everything else stays the same.

  • Mold: Brambleberry 6 Cavity Oval Silicone (3.5” L x 2.5” W x 1” H per cavity)
  • Yield: 6 bars | Cure time: 4–6 weeks | Active time: ~1 hour

Recipe

Component Amount Notes
Olive oil 335g 62% of oils
Coconut oil, refined 76° 151g 28% of oils
Castor oil 54g 10% of oils
Distilled water 205g 38% of oil weight; must be distilled, not tap
Sodium hydroxide (lye) 75g Confirmed at SoapCalc — 62/28/10 @ 6% SF, 540g oils (75.18g, rounded)
Sodium lactate 6ml (~1.25 tsp) Add to cooled lye solution; speeds unmolding
Fragrance (light) ~11g 2% of oils — light rate; FO of choice
Kaolin clay 11g Stick-blend into combined oils before adding lye
  • 6% superfat cushions the higher coconut so frequent hand-washing won’t dry skin. Oil blend 62% olive / 28% coconut / 10% castor.
  • Fragrance at light 2% rate (~11g) — at this load, vanillin browning is a non-issue.
  • Lye confirmed at SoapCalc.net: 75.18g NaOH for 62/28/10 @ 6% SF, 540g oils, 38% water — rounded to 75g.

Instructions

Step 1 — Gear Up

Safety glasses and gloves on before touching anything. Good ventilation. Pre-weigh all ingredients into separate containers.

Step 2 — Prep the Mold

No prep needed for the Brambleberry silicone oval mold. Set on a flat surface.

Step 3 — Make the Lye Solution (allow ~30 min to cool)

  1. Weigh 205g distilled water into the 2qt lye bowl
  2. Weigh 75g lye separately
  3. Pour lye into water — never reverse
  4. Stir until dissolved (heats to ~185°F, brief fumes — don’t lean over it)
  5. Stir in 6ml sodium lactate
  6. Cool to ~105–120°F

Step 4 — Prepare the Oils

  1. Gently melt 151g coconut oil
  2. Combine with 335g olive oil and 54g castor oil in the oils vessel
  3. Stick-blend 11g kaolin clay directly into the combined oils until smooth
  4. Bring oils to ~105–120°F, within ~10°F of the lye solution

Step 5 — Combine and Reach Trace

  1. Pour cooled lye solution into the oils
  2. Stick blend in 5–10 second bursts, alternating with hand stirring
  3. Blend to light trace — expect 3–8 min with this blend

Step 6 — Add Fragrance

  1. Add ~11g FO and hand stir 1–2 minutes — do not stick blend after FO

Step 7 — Pour and Insulate (rest 24–30h)

  1. Pour evenly into the 6 oval cavities; smooth tops
  2. Spritz tops with 99% IPA to prevent soda ash
  3. Insulate (bridge cardboard over the mold or invert a box)
  4. Leave undisturbed 24–30h

Step 8 — Unmold (check at 24h, allow up to 48)

  1. Soap should feel firm, not sticky — give another 24h if soft
  2. Flex the silicone to pop bars out
  3. No cutting — individually molded

Step 9 — Cure (4–6 weeks min)

  1. Rack with airflow on all sides; cool, dry, out of sunlight
  2. 4 weeks minimum, 6–8 better for high-olive bars
  3. Label with batch date

back to contents